Pocket door cabinets: how the Salice Exedra Gravity system works

•

A wall of oak kitchen cabinets with two pocket doors open and slid back into the cabinet, showing a stand mixer and dishes on open shelves above a counter
Pocket door cabinets: how the Salice Exedra Gravity system works
Pocket door cabinets have doors that open like a normal door, then slide straight back into a narrow pocket inside the cabinet, so the opening stays clear while you use it. They suit coffee stations, appliance walls, pantries and laundry cabinets. Salice’s Exedra Gravity system does this for doors from about 43 inches to nearly 10 feet tall.
Get a fixed-price quoteSee recent kitchens
Salice Exedra Gravity at a glance (Salice’s published figures)
Exedra Gravity
Door height 43-5/16" to 118-7/64" (1100 to 3000 mm)
Door width 11-13/16" to 35-7/16" (300 to 900 mm)
Door thickness 3/8" to 1-3/16" (10 to 30 mm)
Maximum door weight 88 lb (40 kg)
Pocket housing 55 mm, fixed to the cabinet side
Movement OUT or IN versions; no cables, tie rods or springs
Hinges Smove soft close, or Push for handle-less doors

Product images courtesy of Salice.

What are pocket door cabinets?

A pocket door cabinet has doors that swing open like a normal hinged door, then slide back into a slim pocket inside the cabinet. Once they are tucked away, the whole opening is clear: no door sticking out into the kitchen, nothing to bump into, nothing to close before you can work.

That makes them the natural choice for any cabinet you leave open while you use it: a coffee station, a wall of small appliances, a walk-up pantry, a bar, a laundry closet or a TV cabinet.

Pocket doors and appliance garages

An appliance garage hides the toaster, the mixer and the coffee machine behind cabinet doors. The question is what the doors do when the appliances are in use. Swing doors stand open into the room. Lift-up and roll-up doors limit how tall the opening can be. Pocket doors go away completely, which is why they are now the most common way to build a large appliance garage.

There are two kinds of appliance garage, and they need different hardware:

  • A full-height appliance wall, where tall doors from the counter or the floor up hide a whole station. This is where a system like Exedra Gravity works.
  • A countertop appliance garage, a short cabinet sitting on the worktop under the upper cabinets. Its doors are too short for Exedra Gravity, which starts at about 43 inches, so it is built with a smaller pocket or sliding system.
A wall of oak kitchen cabinets with two pocket doors open and slid back into the cabinet, showing a stand mixer and dishes on open shelves above a counter
A kitchen appliance wall on pocket doors: open, the mixer and dishes are ready to use. Image: Salice.

How the Salice Exedra Gravity system works

Most pocket door hardware relies on cables, tie rods or springs to keep a tall door square as it slides. Exedra Gravity uses none of them. Salice describes it as moving the door with gravity and a counterweight, and offers it two ways:

  • OUT: the door comes out of its pocket on its own, with an assisted movement, when you start to open it.
  • IN: the door slides back into the pocket on its own once you push it in, finishing on a magnetic buffer so it does not bang.

The mechanism sits in a 55 mm housing fixed to the cabinet side, and every adjustment is made from the front of the cabinet. The hinges come with Smove, Salice’s soft-close, or with Push for handle-less doors, in a nickel-plated or titanium finish.

Diagram of the Salice Exedra Gravity OUT mechanism fitted to a tall cabinet side, with the door partly withdrawn into its pocket
The Exedra Gravity OUT mechanism on the side of a tall cabinet. Image: Salice.

The sizes it handles

By Salice’s figures, Exedra Gravity takes doors from 43-5/16 inches to 118-7/64 inches tall, 11-13/16 to 35-7/16 inches wide and 3/8 to 1-3/16 inches thick, up to 88 pounds each. That covers counter-to-ceiling appliance walls, full-height pantries and floor-to-ceiling cabinets, in wood, veneer or painted doors. There are connector kits for one door or two doors closing to the middle.

Get a fixed-price quoteSee recent kitchens

How we used it in a Walnut Creek kitchen

In a rift white oak kitchen we built in Walnut Creek, the coffee station sits behind a pair of full-height oak pocket doors on Exedra Gravity. Open, the doors slide back into the cabinet and the station is ready to use. Closed, the wall reads as one run of oak.

A full-height wall of cabinets with one bay's pocket doors slid open on oak shelves, a coffee machine and an oak drawer bank
The Walnut Creek coffee station, its oak pocket doors slid back into the cabinet.

What to plan before you build one

  • The pocket takes width. Each door needs its pocket inside the cabinet, so the clear opening is narrower than the cabinet itself. Plan the appliances against the clear opening.
  • Power and ventilation. Put outlets inside the cabinet for the coffee machine or toaster, and leave space above anything that makes heat or steam.
  • The counter inside. Running the worktop straight into the cabinet means appliances stay where they are used.
  • Door weight. Heavy solid or stone-faced doors need checking against the 88 pound limit.
  • Handles or push. Push-to-open suits a handle-less wall; a pull is easier with wet hands.
A tall white laundry cabinet with its pocket doors pushed back, showing a stacked washer and dryer, shelves and drawers
The same system on a laundry cabinet: the doors disappear and the machines stay open to use. Image: Salice.

Where else pocket door cabinets work

Pantries you walk into and out of all day, laundry closets, home bars, media walls that hide a TV, and home offices that need to close up at the end of the day. Anywhere a door would otherwise stand open in your way.

Planning a pocket door cabinet with us

We build every cabinet to your measurements, so the pocket, the opening and the appliances inside are drawn together from the start. Send us your plans or measurements for a fixed-price quote, or see the Walnut Creek kitchen.

Frequently asked questions

What is a pocket door cabinet?

A cabinet whose doors open, then slide straight back into a pocket inside the cabinet, so the opening stays clear while you use it.

How tall can Salice Exedra Gravity doors be?

By Salice’s figures, from 43-5/16 inches up to 118-7/64 inches tall, and up to 88 pounds per door.

Can a countertop appliance garage have pocket doors?

Yes, but its doors are too short for Exedra Gravity, which starts at about 43 inches. A smaller pocket or sliding system is used instead.

Do pocket door cabinets need springs or cables?

Many systems use them. Salice’s Exedra Gravity works without cables, tie rods or springs, using gravity and a counterweight.

Related reading

Get a fixed-price quoteSee recent kitchens

We build every kitchen in our Concord shop and ship it fully assembled, including to Fort Worth, TX, Eugene, OR, Fargo, ND and South Lake Tahoe, CA. See every city we deliver to.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Policy