
| Part | What we used | Why |
|---|---|---|
| Cabinet boxes | Frameless, plywood | Full access to every box, and clean lines that suit straight grain |
| Door and drawer fronts | Rift-sawn white oak | Straight, even grain on every front |
| Finish | Our own stain, mixed 6:1 | One colour across every oak surface in the room |
| Tall pantry wall | Wallpapered doors | A soft, textured block that rests the eye between the oak |
| Island cooktop | Downdraft ventilation | No hood, so nothing blocks the view across the room |
| Ceiling | A solid oak panel, templated to the room | Ties the kitchen to the dining room as one piece |
What is rift white oak?
It is a way of cutting the log, not a different tree. Plain-sawn oak is cut straight through, so the grain shows big arches and flame shapes. Quarter-sawn oak shows the bright flecks oak is known for. Rift-sawn oak is cut at an angle that leaves straight, tight lines from one end of the board to the other.
It costs more, because the cut wastes more of the log. What you get for it is a kitchen where every front looks like it came from the same board.
Why rift oak for this kitchen?
In this kitchen the wood is the whole room, not a feature in it. That only works if the wood is quiet. Busy grain on that many doors turns into noise; straight grain turns into texture.
So the run along the wall, the island, the drawer banks and the ceiling are all the same rift oak, and the grain runs the same direction on every front.

Frameless or framed for white oak?
This kitchen is frameless. There is no face frame around the box, so the doors and drawer fronts sit edge to edge with a small, even gap between them. With straight grain, that gap is the only line in the run, and it reads as deliberate.
Frameless also gives you more room inside every box, because there is no frame narrowing the opening. On a kitchen built mostly from drawers, that is real space. Our frameless boxes are 3/4-inch plywood, with full-extension dovetail drawers and soft-close hinges, all standard.
How do you stain white oak so every piece matches?
White oak takes stain unevenly if you let it. The doors, the drawer fronts, the island and the ceiling were all finished with a stain we mix ourselves, six parts to one, and every oak piece in the room came out of the same mix.
That matters more than the colour you choose. A kitchen where the island is a shade off the wall cabinets looks like two kitchens. One mix, one batch and the same process on every part is how you avoid it.
Why are the pantry doors wallpapered?
A whole room of oak, with nothing to break it up, gets heavy. The full-height pantry wall gives the eye somewhere to rest. Its doors are wallpapered, so they bring a soft, pale texture next to the oak instead of another colour of paint.
Behind those doors, one bay opens on pocket doors that slide back into the cabinet, so the coffee station is out of the way when it is in use and hidden when it is not.

Where does the storage go without upper cabinets?
Into drawers. The sink wall has no wall cabinets at all; the stone runs up around the window instead, and the storage went into deep drawers below. A drawer holds more than the cupboard above it ever did, and you see the back of it without kneeling.
The island adds more. Its end is opened into oak-lined niches for books and pottery, so even the end of the island is storage.

How do you cook on an island without a hood?
With a downdraft. The cooktop sits flush in the island, and the vent pulls air down from the cooking surface instead of up into a hood. Nothing hangs over the island, so the view runs straight across the room to the oak ceiling.
It changes how the island cabinets are built. The downdraft and its ducting take space inside the island, so that box is planned around them from the first drawing rather than adjusted on site.
The oak ceiling, and why we made it twice
The oak does not stop at the cabinets. A solid white oak panel runs across the ceiling and turns down the side of the opening into the dining room as one piece.
Ceilings are not flat or square, so the panel was templated to the real ceiling, not to the drawings. Partway through, one wrong cut ruined a finished panel. We remade it, re-seamed it, and screwed it home from inside the attic. The whole job is logged, day by day, on our project page for this ceiling, including the mistake.

Is rift white oak right for your kitchen?
- Yes, if you want wood to carry the room and you like clean, modern lines. Rift oak and frameless boxes suit each other.
- Yes, if you want the kitchen to age well. Oak is hard, and straight grain hides everyday wear better than a flat paint colour.
- Think twice if you want the grain to be the feature. If you love the arches and flecks of oak, plain-sawn or quarter-sawn shows more of it.
- Plan for the cost of the cut. Rift costs more than plain-sawn, so some kitchens use it where it is seen most and plain-sawn inside.
How long does a kitchen like this take?
We quote 6 to 8 weeks of production from design approval, and about a week to install. The ceiling panel was made to fit on site, so it followed the cabinets. Every box is built to the room’s measurements in our Concord shop and delivered fully assembled. We install in the Bay Area and ship anywhere in the continental US.
Frequently asked questions
What is the difference between rift and plain-sawn white oak?
Plain-sawn oak shows arching cathedral grain. Rift-sawn oak is cut at an angle that leaves straight, tight grain lines, so every door and drawer front reads as one even surface.
Is rift white oak more expensive?
Yes. The rift cut gets fewer usable boards out of each log, so it costs more than plain-sawn oak.
Should white oak cabinets be frameless or framed?
Either works, but rift oak suits frameless best. The fronts sit edge to edge with a small even gap, so the straight grain reads as one surface, and the boxes have more room inside.
How do you keep white oak cabinets the same colour?
Finish every oak piece in the room from the same stain mix and the same process. We mix our own stain for this, so the island, the wall cabinets and the trim come out the same.
Can you cook on an island without a range hood?
Yes, with a downdraft vent that pulls air down at the cooktop. The island cabinet has to be planned around the downdraft and its ducting from the start.
Related reading
- Alder, maple, oak or walnut: which wood is best for kitchen cabinets?
- Framed vs frameless cabinets: the pros and cons of each
- Kitchen cabinet finishes: paint, stain or clear, and which one lasts
We build every kitchen in our Concord shop and ship it fully assembled, including to Tacoma, WA, Omaha, NE, McAllen, TX and Seattle, WA. See every city we deliver to.

Leave a Reply